TH-10G Series Layer 2 Managed POE Switch
The TH-10G POE Series is a Layer 2 managed switch that boasts impressive performance capabilities. With its high-performance switching architecture, this 10-gigabit switch is capable of achieving wire-speed transportation, making it a cost-effective and powerful solution for meeting the evolving needs of enterprise customer networks. Additionally, the switch offers comprehensive end-to-end QoS, as well as a wide range of flexible management and security settings, making it highly adaptable to the increasingly high-speed, secure, and intelligent demands of small and medium-sized enterprise networks. All of these features are offered at an affordable price point, making the TH-10G POE Series a smart and accessible choice for businesses looking to optimize their network performance.
● Port Aggregation, VLAN, QinQ, Port Mirroring, QoS, Multicast IGMP V1, V2,V3 and IGMP snooping
● Layer 2 ring network protocol, STP, RSTP, MSTP, G.8032 ERPS protocol, single ring, sub ring
● Security: support Dot1x, port authentication, mac authentication, RADIUS service; Support port-security, ip source guard, IP/Port/MAC binding, arp-check and ARP packet filteri ng for illegal users and port isolation
● Management : support LLDP, user management and login authentication; SNMPV1/V2C/V3; web management, HTTP1.1,HTTPS; Syslog and alarm grading ; RMON alarm, event and history record; NTP, temperature monitoring; Ping, Tracert and optical transceiver DDM function; TFTP Client, Telnet Server, SSH Server and IPv6 Management, PoE management
● Firmware update: configure backup/restore through Web GUI, FTP and TFTP
| P/N | Fixed Port |
| TH-10G04C0816PM2 | 4x10Gigabit SFP+, 8xGigabit Combo (RJ45/SFP)16×10/ 100/ 1000Base-T PoE |
| TH-10G04C0816PM2R | 4x10Gigabit SFP+, 8xGigabit Combo (RJ45/SFP)16×10/ 100/ 1000Base-T PoE |
| TH-10G0208PM2 | 2x1G/2.5G/ 10G SFP+, 8×10/ 100/ 1000Base-T PoE |
| TH-10G0424PM2 | 4x1G/2.5G/10G SFP+, 24×10/100/1000Base-T PoE |
| TH-10G0424PM2R | 4x1G/2.5G/10G SFP+, 24×10/100/1000Base-T PoE |
| TH-10G0448PM2 | 4x1G/2.5G/10G SFP+, 24×10/100/1000Base-T PoE |
| TH-10G0448PM2R | 4x1G/2.5G/10G SFP+, 48×10/100/1000Base-T PoE |
| Provider Mode Ports | |
| Management Port | Support Console/Support Console and USB |
| LED Indicators | Yellow: PoE/Speed; Green: Link/ACT /none |
| Cable Type & Transmission Distance | |
| Twisted-pair | 0- 100m (CAT5e, CAT6) |
| Monomode optical fiber | 20/40/60/80/ 100KM |
| Multimode optical fiber | 550m |
| PoE (Optional) | |
| PoE | Complies with IEEE 802.3at, IEEE802.3af standard |
| PoE 1-8port/1- 16port/1-24port/1-48port max output power each 30w (PoE+) per port | |
| Support 1/2(+) 3/6(-) Endspan | |
| Smart and standard PoE chipset to detect PD equipment automatically Never burn | |
| the PD equipment/Support Non-standard PD | |
| Support Non-standard PD | |
| Electrical Specifications | |
| Input voltage | AC100-240V, 50/60Hz |
| Total Power consumption | Total power≤440W/Total power≤120W |
| Layer 2 Switch | |
| Switching capacity | 128G/56G/352G |
| Packet forwarding rate | 95Mpps/41.7Mpps/236Mpps |
| MAC address table | 16K |
| Buffer | 12M |
| MDX/ MIDX | Support |
| Flow Control | Support |
| Jumbo Frame | Port aggregation |
| Support 10Kbytes | Support gigabit port, 2.5GE and 10GE port link aggregation |
| Support static and dynamic aggregation | |
| Port features | Support IEEE802.3x flow control, Port traffic statistics, port isolation |
| Support network storm suppression based on port bandwidth percentage | |
| VLAN | Support access, trunk and hybrid mode |
| VLAN Classification | |
| Mac Based VLAN | |
| IP Based VLAN | |
| Protocol Based VLAN | |
| QinQ | Basic QinQ (Port-based QinQ) |
| Flexible Q in Q(VLAN-based QinQ) | |
| QinQ(Flow-based QinQ) | |
| Port mirroring | Many to one (Port Mirroring) |
| Layer 2 ring network protocol | Support STP, RSTP, MSTP |
| Support G.8032 ERPS protocol, single ring, sub ring and other ring | |
| DHCP | DHCP Client |
| DHCP Snooping | |
| DHCP Server | |
| ARP | ARP table aging |
| Layer 2+ | IPv4/ IPv6 static routing |
| Multicast | IGMP V1,V2,V3 |
| GMP snooping | |
| ACL | IP Standard ACL |
| MAC extend ACL | |
| IP extend ACL | |
| QoS | QoS Class, Remarking |
| Support SP, WRR queue scheduling | |
| Ingress Port-based Rate-limit | |
| Egress Port-based Rate-limit | |
| Policy-based QoS | |
| Management and maintenance | Support Dot1 x, port authentication, MAC authentication and RADIUS service |
| Support port- security | |
| Support ip source guard, IP/Port/MAC binding | |
| Support ARP- check and ARP packet filtering for illegal users | |
| Support port isolation | |
| Support LLDP | |
| Support user management and login authentication | |
| Support SNMPV1/V2C/V3 | |
| Support web management, HTTP1.1, HTTPS | |
| Support Syslog and alarm grading | |
| Support RMON (Remote Monitoring) alarm, event and history record | |
| Support NTP | |
| Support temperature monitoring | |
| Support Ping, Tracert | |
| Support optical transceiver DDM function | |
| Support TFTP Client | |
| Support Telnet Server | |
| Support SSH Server | |
| Support IPv6 Management | |
| ( Support PoE management optional) | |
| Support FTP, TFTP, WEB upgrading | |
| Environment | |
| Temperature | Operating: – 10 C~+ 50 C; Storage: -40 C~+ 75 C |
| Relative Humidity | 5%~90% (non-condensing) |
| Thermal Methods | Fan-less, natural heat dissipation/Support fan speed control |
| MTBF | 100,000 hours |
| Mechanical Dimensions | |
| Product Size | 440*245*44mm/440*300*44mm/210*210*44mm/440*300*44mm |
| Installation Method | Rack-mount/ Desktop |
| Net Weight | 3.5kg/4.2kg/0.7kg |
| EMC & Ingress Protection | |
| Surge Protection of Power port | IEC 61000-4-5 Level X (6KV/4KV) (8/20us) |
| Surge Protection of Ethernet port | IEC 61000-4-5 Level 4 (4KV/2KV) (10/700us) |
| ESD | IEC 61000-4-2 Level 4 (8K/ 15K) |
| Free fall | 0.5m |
| Certificates | |
| Security Certificate | CE, FCC, RoHS |
